Publicité
Les langues disponibles
Les langues disponibles
26 INSTALLATION
Adjusting Leveling Feet
Adjust as needed until the dishwasher is
completely leveled.
Adjusting Front Leveling Feet
• Use a flat-blade screwdriver to turn the front
leveling feet and adjust the front of the tub.
• Turn the front leveling feet clockwise to raise the
front of the tub and counterclockwise to lower it.
• The adjustments work identically for both front
leveling feet.
When the flat-blade screwdriver is unavailable,
use a 1/4" square drive wrench(
drive wrench(
) with 1/2" socket(
b
front leveling feet and adjust the front of the tub.
Adjust the front and rear leveling legs until they
are all in firm contact with the floor. Failure to level
the dishwasher may prevent the door from closing
properly and the dishwasher will not turn on.
) or 3/8" square
a
) to turn the
c
Adjusting Rear Leveling Foot
• Use a Phillips screwdriver to adjust the rear
leveling foot and the rear of the tub using the
center screw at the base of the appliance in the
front.
• Turn the center screw clockwise to raise the rear
of the tub and counterclockwise to lower it.
NOTE
To avoid damaging the screw, do not use an
electric screwdriver.
Publicité
