Télécharger Imprimer la page

Faicom A Notice D'utilisation Et D'entretien page 11

Enrouleurs automatiques

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT! Any installation operation shall be carried out by a suitably
trained staff, following carefully the information given in this manual.
Check the packaging at the reception of the goods and store only at a dry place. Verify that
the device has not been damaged during transport or storage operations. Make sure you
receive all the components. Ask the manufacturer for any possible missing component.
The hose reel has to be wall mounted at a minimum height of the floor of 2.50 m in
order to prevent accidents during work operations. Considering the hose reel weight
and dimensions, its movement requires the use of lifter devices. In particular cases it is
possible to mount it on the floor or on other machines as accessory, only if complete with
a fixed support. Choose the most suitable position for the outlet of the hose between the 2
alternatives suggested (see pictures A - B p.28/29). Mount the hose reel in fixed position or
with revolving stand (optional) on stiff and consistent walls using 4 dowels of 10 mm diame-
ter
see drawing p.28/29
(
WARNING! The manufacturer declines any responsibility for injuries to people or da-
mages to things caused by a wrong assembly of the hose reel.
Always connect the hose reel to the line by the couplers and the flexible hose (A)
suitable for this use, above all in case of high pressure and temperature.
IMPORTANT! When you lock the coupler, keep back the
swivel joint by the 27 wrench (B) in order not to damage it.
Thus it is possible to avoid consequent losses of fluid from
the inside seal (hose reel for high pressure). According to
the rules, put a ball-tap on the feeding line of the hose reels
in order to make the maintenance operations easier. The
said ball-tap can be used as a safety valve for dangerous
situations. IMPORTANT! For versions that mount hoses
manufactured with materials suitable for water passage
for contact with food, before use carry out an adequate
washing flow of the parts in contact with the fluid.
8 - INSTALLATION
).
9 - LINK
- 11 -

Publicité

loading

Ce manuel est également adapté pour:

AlAxAlx