Publicité
Les langues disponibles
Les langues disponibles
ABL LINK
Use this function to set a uniform brightness for each
display.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example: Setting "ON"
On "ABL LINK" of "VIDEO WALL" menu, select "ON",
then press the MENU/SET button.
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL.
ADJ.
Information
ABL LINK settings
ON: Sets a uniform brightness for each screen in a video
wall. This can be set only when a 2×2 or 3×3 video
wall is selected.
OFF: Sets the individual screen brightness for each
screen in a video wall.
* When this function is set "ON", connect your plasma
displays with the remote cable (optional) in the order of
the position numbers for the 2×2 video wall. See the
drawing below.
* If there are changes in the DIVIDER or POSITION,
the ABL LINK will automatically turn OFF.
REMOTE
OUT
No.1 No.2
REMOTE
IN
No.4
No.3
REMOTE
Display 1
REMOTE
No.1 No.2
REMOTE
OUT
No.4
No.3
REMOTE
IN
Display 4
* With the 3×3 video wall, connect the final display to the
first display the same way as with 2×2 video wall.
Note: The remote control can be operated unless the IR
REMOTE is set to "OFF".
:
1
:
NORMAL
:
OFF
:
OFF
:
ON
:
OFF
EXIT RETURN
No.1 No.2
REMOTE
No.4
No.3
OUT
IN
Display 2
OUT
No.1 No.2
REMOTE
No.4
No.3
IN
Display 3
REPEAT TIMER
Use this to set two timers. Each timer can use the
DIVIDER, SOURCE and WORK TIME functions.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example:
TIMER1...VIDEO1 will be displayed for 3 minutes.
TIMER2...PC1 will be displayed for 6 minutes in a
2×2 video wall.
On "REPEAT TIMER" of "VIDEO WALL" menu, select
"ON", then press the MENU/SET button.
The "REPEAT TIMER" screen appears.
Adjust the items.
REPEAT TIMER
1 DIVIDER
SOURCE
WORK TIME
2 DIVIDER
SOURCE
WORK TIME
SEL.
ADJ.
Information
REPEAT TIMER settings
DIVIDER: Divide the screen into 1, 4 or 9 sections.
SOURCE: Set the input mode to be displayed.
WORK TIME: Can be set to up to 4 hours 15 minutes
in units of 1 minute.
If you set both timers, Timer 1 and Timer 2 run
consecutively.
In the case of the Video wall, timer No.1 can be used to
control all the displays simultaneously.
* This becomes effective when the OSD goes out.
Advanced OSD Settings Menu
Setting the menu mode
This allows you to access full menu items.
When P. ON DELAY or ABL LINK is ON, this won't be
turned OFF.
Example: Setting "ON"
On "ADVANCED OSD" of "MAIN MENU", select "ON".
MAIN MENU
1 / 2
PICTURE
SOUND
SCREEN
OPTION1
ADVANCED OSD
:
OFF
NEXT PAGE
SEL.
ADJ.
EXIT EXIT
Information
ADVANCED OSD settings
ON: All of the main menu items are available for
advanced users.
OFF: Some of the main menu items are not available
(e.g. OPTION2 and OPTION3).
:
1
:
VIDEO1
:
00H03M
:
4
:
PC1DSUB
:
00H06M
EXIT RETURN
MAIN MENU
1 / 2
PICTURE
SOUND
SCREEN
OPTION1
OPTION2
OPTION3
ADVANCED OSD
:
ON
NEXT PAGE
SEL.
ADJ.
EXIT EXIT
27
En
Publicité
