Publicité
Les langues disponibles
Les langues disponibles
DISP. MODE
Select the screen mode from between two options
(NORMAL, ADJUST).
Example: Setting "ADJUST"
On "DISP. MODE" of "VIDEO WALL" menu, select
"ADJUST".
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL.
Information
DISP. MODE settings
NORMAL: Combines enlarged screens and creates
multiple screens.
ADJUST: Corrects misalignment of combined screen
portions and creates multiple screens
AUTO ID
This feature automatically sets the ID numbers of multiple
displays connected to each other.
Example: Setting "ON"
Set the ID number for the No. 1 display on ID NUMBER
menu.
On "AUTO ID" of "VIDEO WALL" menu, select "ON",
then press the MENU/SET button.
AUTO ID
1
4
Information
AUTO ID settings
ON: Enables Auto ID function. In the case shown below,
display 1 will be set as ID 1, display 2 as ID2, etc.
This can be set only when a 2×2 or 3×3 video wall is
selected.
No.1 No.2
REMOTE
IN
No.4
Display 1
No.1 No.2
REMOTE
OUT
No.4
OFF: Disables Auto ID function.
26
En
VIDEO WALL
:
1
:
ADJUST
:
OFF
:
OFF
:
OFF
:
OFF
ADJ.
EXIT RETURN
AUTO ID
:
ON
2
1
2
3
3
8
9
4
7
6
5
WIRED CABLE
CONNECTION TURN
EXIT RETURN
ADJ.
REMOTE
OUT
No.1 No.2
No.4
No.3
No.3
REMOTE
IN
Display 2
REMOTE
OUT
No.1 No.2
No.3
No.4
No.3
REMOTE
IN
Display 3
Display 4
SCREEN
The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position
On "VIDEO WALL" menu, select "SCREEN", then press
the MENU/SET button.
The "SCREEN" screen appears.
On "V.POSITION" of "SCREEN" menu, adjust the position.
SCREEN SIZE
V.POSITION
H.POSITION
V.SIZE
H.SIZE
AUTO PICTURE
PHASE
CLOCK
SEL.
Information
SCREEN settings
These are the same functions as the SCREEN menu on
page 16.
P. ON DELAY (Power on delay)
Use this function to activate power-on delay.
Turn on the AUTO ID before the following operations.
Example: Setting "ON"
On "P. ON DELAY" of "VIDEO WALL" menu, select "ON".
Information
P. ON DELAY settings
ON: Turns on the main power of each display after a
delay time.
OFF: Turns on the main power of all displays at the
same time.
(Only for 16 and 25 screens)
MODE1: Turns on the main power of each display
delayed.
MODE2: Turns on the main power of each display more
delayed.
REMOTE
OUT
* Once this function has been set to "ON", the POWER
ON/OFF button on the remote control does not function
except for the No.1 monitor.
By pressing the POWER ON button on the remote
REMOTE
control the No.1 monitor will turn on and the others
IN
will be turned on one by one automatically.
* From the second monitor onward, neither the POWER
button on the unit nor the POWER ON button on the
remote control works. However, by pressing and holding
the POWER ON button for more than 3 seconds, the
monitor will be turned on.
SCREEN
4 : 3
:
:
OFF
V.POSITION
ADJ.
EXIT RETURN
VIDEO WALL
DIVIDER
:
1
POSITION
DISP. MODE
:
NORMAL
AUTO ID
:
OFF
SCREEN
P. ON DELAY
:
ON
ABL LINK
:
OFF
REPEAT TIMER
:
OFF
SEL.
ADJ.
EXIT RETURN
+64
Publicité
