SPORTSTECH F31s Manuel page 30

5. Setting up, Folding, Storing
5.1 SETTING-UP
Find a location for the device that meets the following requirements:
• Dry interior
• Device does not cover any ventilation openings.
• Heat-resistant robust base; use floor protection mat if necessary
• Clearance of at least 2 m (6.6 ft) behind the device.
• Clearance of at least 1 m (3.3 ft) on both sides of the device.
• Clearance of at least 30 cm (1.0 ft) in front of the device.
5.2 FOLDING OUT
• Stand safely in front
of the device take.
Hold the rear end of
the running belt frame
with both hands.
• Carefully push locking
spring (A) inwards
with the tip of your
foot until the lock is
released.
• Carefully lower the
running belt frame.
5.3 FOLDING IN AND STORING
• Pull out the electrical
connection plug.
• Lift the rear end of the
running belt frame
upwards with both hands
until the locking spring
(A) holds the frame
securely in the upper
position.
• Check that the running
belt frame is safely
locked.
• Store the device out
of reach for animals and children. Store in dry and clean indoor environment. Protect against direct
sunlight. Protect against dust.
30
A
0,3m (1ft)
0,3 m
1m
1m
1 m
1 m
(3.3ft) (3.3ft)
2m
2 m
(6.6ft)
A