Faicom VR Notice D'utilisation Et D'entretien page 10

6 - MARKING AND IDENTIFICATION
Model
Features
Year of
construction
7 - MOUNTING OF THE HOSE (Models without hose)
Serial
Number
The hose reels without hose are supplied with the un-
7.1
loaded spring.
Use a hose with dimension and pressure characteristics
suitable for use according to the hose reel model.
7.1) Fix the hose reel to the bench.Put the hose betwe-
en the guide rollers, connect it to the fitting which is
inside the drum and tighten by the suitable wrench.
7.2) Rotate manually the drum in order to rewind com-
pletely the hose.
7.3) Spring Preload: Hold the hose-end and rotate the
drum in the opposite direction to pre-load the spring
7.2
(see technical manual). During preloading do not
release the hose. A violent inversion of the ro-
tation could cause damage to operators and to
the spring of the hose reel making the product
unusable. Insert again the hose-end between the
guide rollers.
7.4) Put the hose stopper at the desired length.
7.5) Unwind the hose and rewind it completely, to check
if the hose reel works properly.
7.3 7.5
We affix the CE and UKCA
marking as the manufacturer
of this equipment.
On the equipment is securely
attached a tag with curing
adhesive system on which,
in addition to the name of
the manufacturer and the
symbols "CE" and "UKCA",
all necessary information for
good identification of the
machine are indicated
(model, duty, year of
construction, weight, etc.).
Weight
QR-Code
for manual
WARNING! DO NOT PUT
HANDS OR ANY OTHER
THING INSIDE THE DRUM!
- 10 -
WARNING!