Xiaomi S10+ Manuel D'utilisation page 13

How to Use
Connect with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/
Xiaomi Home app to control your device, and to interact with other smart home
devices.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the
app is installed already. Or search for "Mi Home/Xiaomi
Home" in the app store to download and install it.
Open the Mi Home/Xiaomi app, tap
and then follow the instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Notes:
· This robot vacuum works with the Mi Home/Xiaomi Home app, and it supports Android 4.4 & iOS
10.0 or above.
· Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions based on the
current app version.
Reset Wi-Fi
When there is a connection loss between your phone and the robot vacuum due to the
router reconfiguration, wrong password or so, please follow the steps below:
1. Open the cover of the robot vacuum so that you can see the Wi-Fi indicator.
2. Simultaneously press and hold the buttons
indicate that the robot vacuum is waiting for the network configuration.
3. When the Wi-Fi indicator blinks, the Wi-Fi connection has been reset successfully.
10
on the upper right,
5812D4E4
and until you hear a voice to
Start Cleaning
Press the button on the robot vacuum or tap the button
robot vacuum will clean all areas by first cleaning along edges and walls and
then in an S-shape pattern. Once the cleaning is complete, the robot vacuum will
automatically return to the charging dock to charge.
Method 1: Press the button on the robot vacuum to start cleaning.
Method 2: Tap the button in the app to start cleaning.
Notes:
· Before a cleaning task, make sure the robot vacuum is on the charging dock and fully charged.
Do not move the robot vacuum during cleaning.
· When using the robot vacuum for the first time, it is recommended to follow the robot vacuum
and remove any obstacles on the ground. If the robot vacuum may get stuck or scratch the
surface of the furniture in some areas, you can set restricted areas in the app to prevent the
robot vacuum from entering those areas.
in the app, and the