Publicité
Les langues disponibles
Les langues disponibles
The burner opening must be positioned properly over the valve orifices.
6. Care and Maintenance
6.1 Care
Regular care of your grill will help keep it operating properly. All maintenance should be done only
when the grill is cool and with the fuel supply turned off. Occasionally inspect and tighten hardware
that may become loose.
6.2 Cleaning The Venturi Tube
A spider's nest or wasp's mud inside the Venturi can block gas flow and can even cause a fire at
the gas control valve. Such a fire can cause operator injury and serious damage to your grill.
To prevent insect related problems, inspect the Venturi tube screen cover regularly and remove
any dirt.
WARNING!
Do not disassemble or alter the fuel supply system. Improper assembly can result in a hazardous
condition. Seek qualified professional assistance if repairs are required.
6.3 Cleaning And Maintenance
WARNING: Do not clean any grill surface while grill is operating.
Let grill cool to a safe temperature prior to cleaning.
• Disconnect the fuel supply and remove the fuel supply cylinder prior to cleaning.
• Cleaning should be done where detergent won't harm work surface or lawn.
Exterior Cleaning
• Clean grill exterior surfaces with warm soapy water. Stainless steel lid panel and side
shelves can be cleaned with commercial stainless steel cleaner.
• Wash drip tray in warm soapy water – do not run through dishwasher.
Interior Cleaning
• Cooking grate can be cleaned with a grill brush. For best results, cooking grate should be
warm (warm, not hot – never brush with grill operating, or when interior is very hot). If desired,
cool cooking grate can be removed from grill and cleaned with warm soapy water.
• Should you wish to remove accumulated debris from the bottom of the fire box, proceed as
follow:
– Let grill cool completely
18
Downloaded from
www.Manualslib.com
manuals search engine
Publicité
