Atag HG9511EBA/A4 Mode D'emploi page 28

OPERATING INSTRUCTIONS
Ignition and adjustment
2
3
4
1
control knob
2
3
6
5
1
control knob
wok with double
regulator
EN 4
Standard burner and wok burner with single regulator
1. zone indication
2. 0 position
3. high setting
4. low setting
Each burner is fully adjustable between high and low settings.
• Press the control knob and turn it anticlockwise. The burner will
ignite.
• Press the control knob fully for at least 3 seconds between high
(3) and low (4) settings. The thermocouple safety pilot has been
activated.
Wok burner with double regulator
1. zone indicator
2. 0 position
3. high setting
7
5. outer ring low setting / Inner ring high setting
6. outer ring off / inner ring high setting
7. inner ring low setting
The wok burner with double regulator is easy to control.
• The outer ring can be adjusted between high setting and low setting
between positions 3 and 5. The inner ring will then continue to burn
on high setting.