Oster BVSTDCEJX36 Manuel D'instructions page 8

NOTE: If the glass decanter is not in place then the coffee maker will not brew and the
grounds will overflow from the filter basket. An overflow may cause personal injury or
damage to property.
CAUTION: To reduce the risk of damaging the glass decanter and/or the risk of personal
injury, do not add cold water to the decanter if the same is already hot. Allow the glass
decanter to cool before using.
BREWING COFFEE NOW
1. After completing the steps in the "Adding Water and Coffee"
section and with the decanter and the filter basket securely in
place, turn the coffee maker on by pressing the select "Colar
Ahora./Apag." button once (Figure 5). The brew now "Colar
Ahora" light will turn on and pulse to signal that the coffee
maker is on and brewing.
2. To enjoy a more full flavored cup of coffee, press the Brew
Strength "Intensidad" button once. (Figure 6). The strong
"Fuerte" brew strength light will turn on. The coffee maker
will remain in the brew strength you have selected until you
change it back to regular "Regular" strength by pressing the
brew strength button or until you unplug the unit.
3. After the used coffee grounds have cooled, carefully remove
the filter basket and discard them.
NOTE: Always allow the coffee maker to cool down before
cleaning.
4. Prior to making a second pot of coffee, turn the coffee maker
off. This will reset the fresh brew timer feature. To turn the coffee maker off, press
the select "Colar Ahora./Apag." button until all lights turn off.
5. Make sure the glass decanter is empty before starting to brew coffee.
6. Be sure to turn your coffee maker off when no longer using it.
NOTE: Scalding may occur if the lid is open during brewing cycles.
THE FRESH BREW TIMER FEATURE
The fresh brew timer feature lets you know how long your coffee
has been waiting for you. At the start of the brew cycle, the fresh
brew timer feature will automatically be activated.
Press the fresh brew timer "Temporizador de Frescura" button
once (Figure 7) and the clock time will change to show the
amount of time that has passed since brewing completed.
Push again to display current time.
NOTE: The brew now "Colar Ahora" light must be on for the
fresh brew timer feature to operate. The time and delay brew time cannot be set
when the fresh brew time is displayed.
All manuals and user guides at all-guides.com
English-7
figure 5
figure 6
figure 7