Trevi XR 86 BT Mode D'emploi page 10

TWS FUNCTION (TRUE WIRELESS STEREO)
With this function it is possible to pair 2 loudspeakers (to be purchased separately) for a stereo
music reproduction; this feature is only available in Bluetooth mode with compatible devices.
1. Turn off the bluetooth function on your phone or other Bluetooth device.
2. Turn on the two speakers and select the Bluetooth mode.
3. Briefly press the button (7) of one of the speakers (activation of the TWS pair, a sound will
be heard), after a few seconds the two speakers will be paired (the guide voice will inform
you of the pairing).
4. Activate the BT on the phone or other Bluetooth device, search for and pair the speaker
named "XR 86 BT" and enter the PIN "0000" if required.
5. Once pairing has been completed (the guide voice will inform you of the pairing) it will be
possible to play the music tracks in stereo mode on both speakers.
Note:
- In the event of failure to connect between the 2 loudspeakers, switch off both devices and
repeat steps 1, 2 and 3.
RADIO OPERATION
Before using the Radio function, insert the Micro USB cable into the socket (3), so that it
acts as a receiving antenna.
- Select the radio function.
- Press the button (8) to start scanning and storing radio stations automatically.
- Once the stations have been stored, press the button (6) to select the station
previous or the (9) button to select the next station.
TECHNICAL FEATURES
Rechargeable Battery: ....................... Internal Lithium 3.7V, 1200mAh
Power: .............................................. 5V
Bluetooth max power ransmission: .... 0,8mW
Bluetooth transmission frequency: .... 2.4GHz
Radio frequency: .............................. 87.5- 108.0MHz
Dimensions: ..................................... 140 x 96 x 96 mm
Weight: ............................................. 405 gr.
INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: the operation of removal and disposal is reserved to technical personnel!
Whatever type of battery used up, it should never be placed in household waste, fire or
water. Each type of used battery must be recycled or disposed of at an appropriate dedicated
collection points.
To remove the battery:
1. Remove the two side plastic rings and the aesthetics plastic control cover.
2. Remove the cloth cover and unscrew the screws in the unit cabinet.
3. Separate the plastic parts of the cabinet, locate the battery, disconnect it and remove it.
1A