Ibiza Light LZR360RGB-FX Manuel D'utilisation page 4

Stand Alone Preprogrammed Laser Show
 Press MODE to enter MODE OPTION.
 Press UP or DOWN to select your favorite Stand Alone mode as above.
 Press ENTER to confirm the setting.
The laser is working in stand alone. Each time when you turn on your laser, you will have this confirmed laser show.
In the MODE OPTION setting, the stand alone laser show that you are going to choose, is flashing. Press UP or DOWN
to change stand alone laser show, you will have 24 different stand alone preprogrammed laser show.
MASTER/SLAVE MODE
Press MODE to enter MODE OPTION

Press the UP/DOWN buttons until the LED panel shows SLAV

Press ENTER to confirm the setting.

The laser is working in "SLAVE MODE". Connect MASTER laser and SLAVE lasers with DMX cable, the SLAVE lasers do
what exactly MASTER laser does.
DMX MODE
Press MODE to enter MODE OPTION

Press the UP/DOWN buttons until the LED panel shows D001.

Press ENTER to confirm the setting.

The laser is working in "DMX MODE". Change the DMX address of the laser via the UP/DOWN buttons.
DMX PROTOCOL
Channel Value
CH1 0-255
CH2 0-255
CH3 0-255
CH4 0-255
CH5 0-255
CH6 0-255
0-127
CH7
128-255
0
1-250
CH8
250-255
©Copyright Lotronic 2018
Function
R,G,B.Total dimming: linear dimming from dark to light
Red off , Brightness gradually dimmed from dark
Green off , Brightness gradually dimmed from dark
Blue off , Brightness gradually dimmed from dark
Strobe: slow to fast
Motor positioning function
Motor forward infinite rotation, speed from fast to slow
Motor reverse infinite rotation, speed from fast to slow
CH1～ CH7 functions
Built-in programs AUTO show: P4 P5 P6 P7
Built-in programs sound show: SO1 AO2
LZR360RGB-FX 4