First Start-Up - Sono Swiss preSET SW 1/H Mode D'emploi

7. First Start-up

Packaging
If possible, keep the original packaging (or dispose of it properly in accordance with the applicable disposal guidelines).
If possible, use the original packaging for transport (e.g. for service/repair).
Check for transport damage
Inspect the machine before the first start-up for possible transport damage. In the event of visible damage, the machine must not be connected to the
power supply. In this case, please contact your supplier and the carrier.
Placement
Place the machine on a dry and stable surface for operation. Ensure sufficient ventilation!
The machine must not be placed and operated on a soft surface such as a towel or similar!
Moisture may penetrate into the underside of the machine.
Environmental Conditions
Permissible ambient temperature during operation: +5 °C to +40 °C
Permissible relative humidity during operation: max. 80%
Only operate indoors
WARNING
Danger of electric shock from ingress of liquid!
Protect the machine against ingress of moisture.
The interior of this machine is protected against dripping liquids.
Nevertheless, keep the mounting surface and the case dry to prevent electrical accidents and machine damage.
The machine may only be operated at a socket outlet with a residual current circuit breaker (RCCB).
36 | EN
SONOSWISS_GebrauchsanleitungD-E-FR-IT-ES_ARIAL_P.indd 36 16.10.18 08:02