Thermador Emerald DWHD640EPR Guide D'installation page 13

4.10 Secure the Dishwasher
Center the dishwasher in the opening.
1.
If using the Top Mount, and screw the 1/2" (12.7mm)
2.
wood screws through the holes in the mounting
brackets. Choose the bracket hole best suited for your
installation.
If the dishwasher came with a protective barrier, screw
through the barrier.
For Side Mount, lift the flap on the deco strip and insert
3.
the 1/2" (12.7mm) wood screws underneath.
=
x x
4.11 Attach the Standard Toe Panel
Insert the toe panel brackets into the openings on both
1.
sides by pressing hard until they are fully seated.
Use the 3/4" (19mm) toe panel bracket screws to mount
2.
metal brackets to the base
Slide toe panel into position ensuring the bottom of the
3.
toe panel is flush with the floor.
Use the 9/16" (14mm) toe panel screws to mount the
4.
toe panel through the hole it matches up with on the
metal brackets.
The toe panel height can be adjusted by screwing into a
different hole in the bracket.
Installation Procedure en-us
13