Selve commeo Receive Notice De Réglage page 32

EN Device description/General
Switches/key switches connection (extensions)
Connection terminals for a switch/key switch. The arrows
i ndicate the switch direction. In default condition, the exten-
sions are set to dead-man mode (switch). The receiver function
extension can be changed to the signal mode (key switch) in
the CONFIGURATION mode (see CONFIGURA TION mode,
only in commeo mode).
3. General
The commeo Receive converts radio signals into control
s ignals.
3.1. Designated use
The commeo Receive may be used to control roller shutter,
awning and venetian blind systems or other electrical load
only.
• P lease note that radio sets cannot be operated in areas with
increased risk of interference (e.g. hospitals, airports).
• T he remote control is only permitted for equipment and sys-
tems with which a malfunction in the hand-held transmitter or
receiver does not present a risk to persons, animals or objects,
or this risk is covered by other safety devices.
• T he operator does not enjoy any protection from disturbances
by other remote signalling equipment and terminal equip-
ment.
32