Publicité
Les langues disponibles
Les langues disponibles
CHARGING
You can set whether to charge the battery pack when a DC IN
cable or USB cable is connected while the power is ON.
1 Access Menu No. 923.
2 Select [On] or [Off].
[Off]:
Does not charge when the power is ON.
[On]:
Charges even when the power is ON.
Note:
¡ When the power is off, the battery will be charged
regardless of the settings.
TRANSCEIVER RESET
There are 3 types of transceiver reset available:
VFO Reset
Use to initialize the VFO and accompanying settings.
Partial Reset
Use to initialize all settings other than the Memory channels,
and the DTMF memory channels.
Full Reset
Use to initialize all transceiver settings that you have
customized. (Date and time are not reset.)
There are 2 ways to perform a reset on the transceiver: by key
operation and by accessing Menu mode.
Key Operation
1 Turn the transceiver power OFF.
2 Press [F] + Power ON until reset screen appears.
3 Select your desired reset type: [VFO Reset], [Partial Reset],
or [Full Reset].
4 Press [A/B] to set the reset type.
A confirmation message appears on the display.
5 Press [A/B] again to perform the reset.
Menu Mode
1 Access Menu No. 999.
2 Select your desired reset type: [VFO Reset], [Partial
Reset], or [Full Reset].
Note:
¡ Press [PF2] + Power ON to set the voice guidance to
Auto1 after Full Reset.
OTHER OPERATIONS
25
Publicité
