13 Cleaning the backflow preventer/shut-off device
Ensure sufficient supply air during opera-
tion.
13 Cleaning the backflow pre-
venter/shut-off device
The backflow preventer (ER GH AP) or shutter
with shut-off device against fire transmission (ER
GH APB) must be checked for proper functioning
of the shutter and for soiling during the regular in-
spection.
1. After removing the fan insert, check that the
shutter moves easily and closes automatically.
2. If the fan insert is excessively dirty, the mech-
anism of the shutter and shut-off device can
be checked for dirt and cleaned if necessary.
NOTICE A manual triggering test of the shut-
off device against fire transmission by remov-
ing the soldered strut is not permitted!
14 Spare parts
Spare parts may only be sourced from and
fitted by a specialist installer.
Designation
Exhaust socket with
backflow preventer
ABSM RK ER-UPD/-
UPB
Exhaust socket made of
plastic
ABSK ER-UPG/ER-AP
Shutter support with
backflow preventer
KA RK K
Air outlet element
AEH AP ER EC
Terminal block KL ER
In case of questions, please contact:
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen, Deutschland
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail: ersatzteilservice@maico.de
Spare parts can be ordered at
www.shop.maico-ventilatoren.com.
42
Article no.
E093.0977.0001
E059.0884.0001
E093.0608.0001
E093.1627.0000
E157.0326.0000
15 System and accessory com-
ponents
15.1 System components
ER EC/ER EC 2.1 fan insert
Article no. 0084.0360 / 0084.0365
• Fan insert for installation in flush-mounted/sur-
face-mounted housing. Air volume 30 m³/h,
60 m³/h. In combination with an intelligent cover
for the base load, also possible with 20 m³/h, 40
m³/h, 60 m³/h, or 100 m³/h and the full load 20
m³/h, 30 m³/h, 40 m³/h, 100 m³/h.
• Air outlet adapter with air outlet facing upwards
(factory setting).
• Air outlet adapter with air outlet facing the rear
(can be converted without tools).
ER-A cover
Article no. 0084.0361
• Standard model
• Air volume 30 m³/h, 60 m³/h
• Installation and operating instructions for ER
EC-Abdeckungen
ER-AH cover
Article no. 0084.0363
• Model with humidity control and intelligent time
module
• Air volume 30 m³/h, 60 m³/h according to fact-
ory setting. Further volumetric flows that can be
set: Base load: 20 m³/h, 30 m³/h, 40 m³/h, nom-
inal load: 40 m³/h, 60 m³/h, 100 m³/h
• Installation and operating instructions for ER
EC-Abdeckungen
ER-AK cover
Article no. 0084.0362
• Comfort version with intelligent time module
• Air volume 30 m³/h, 60 m³/h according to fact-
ory setting. Further volumetric flows that can be
set: base load: 20 m³/h, 30 m³/h, 40 m³/h, 60
m³/h or 100 m³/h, full load: 20 m³/h, 30 m³/h, 40
m³/h, 60 m³/h or 100 m³/h
• Installation and operating instructions for ER
covers
ER-AB cover
Article no. 0084.0364