Krüger & Matz KM1995 Manuel De L'utilisateur page 12

Connecting speakers
1. Plug the banana plugs to corresponding colors in the
speaker and in the unit.
OR
1. Slightly unscrew the nuts on the sockets on the back
of the main unit.
2. Insert the stripped part of the wire completely. The
right speaker cables should be connected to the "R"
socket, the left speaker cables to the "L" socket,
making sure that the cables connected to the central
unit are connected to the speakers in the same way
(red socket on the central unit to the red socket on the
loudspeaker, black in the same way as red).
3. Tighten the socket nuts firmly so that the inserted
EN wires do not fall out.
Connecting external device
With an RCA cable
Connect left and right channel to AUX IN socket.
22
Owner's manual Owner's manual
With an optical cable
Connect the optical cable to the OPTICAL IN socket
With a 3,5 mm audio cable
Connect the cable to the 3,5 mm audio input.
Connecting FM / DAB+ antenna
1. Connect the FM antenna to FM radio socket at the back
2. If connection is poor, connect the outside antenna.
Caution: To avoid noise, keep antennas away from the
system, the connecting cord and the AC power cord.
Connecting to power supply
Caution:
• Ensure that the power supply voltage corresponds to the
• Before connecting the AC power cord, ensure you have
of the unit.
voltage printed on the back or the underside of the unit.
completed all other connections.
EN
23