1 Using The Timer; Setting The Wake-Up Timer - Pioneer XR-A9700DV Mode D'emploi

1 1 Using the Timer

Setting the Wake-up Timer

STANDBY/ON
52
En
The clock must be set to the correct time for the wake-up timer to work properly.
Use the wake-up timer to set a time for the system to switch on and start playing your
choice of source. The wake-up timer remains active (so the system will switch on
everyday at the time you set), until you reset it. Here's how to set it:
1
2
3
4
5
S.M.JOG
6
7
SET
TIMER/CLOCK ADJ
8
9
10
Note: you cannot set both the wake-up timer and the record timer simultaneously.
Select the source you want played.
For example, press tuner/band to select the radio as your source.
Prepare the source.
For example, tune in the radio station you want to wake up to.
If you've selected a CD or tape, make sure that it is stopped.
Set the volume.
Remember that things tend to sound louder first thing in the morning...
Press TIMER/CLOCK ADJ.
Turn the S.M.JOG dial until the display shows
TIMER, then press SET.
Set the switch-on time.
Use the . . to set the hour, then press
S M JOG
Set the minute in the same way, pressing
Set the switch-off time.
Use the . . to set the hour, then press
S M JOG
Set the minute in the same way, pressing
The switch-on and switch-off times are confirmed in the display after pressing
this last time.
SET
Switch the system into standby mode.
Press TIMER/CLOCK ADJ.
Turn the S.M.JOG dial until the display shows
WAKE UP, then press SET.
Wake up timer setup is complete!
.
SET
when you're done.
SET
.
SET
when you're done.
SET