Bosch 06033D0000 Notice Originale page 13

– Insert the individual vacuum cleaner accessories firmly
into the connection on the dust container (6) and into one
another.
Operation
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
Starting Operation
Before extraction, ensure that the filter unit is se-
u
curely fitted.
Do not use damaged filters (e.g. no cracks, small
u
holes, etc.). Replace any damaged filters immedi-
ately.
Switching on/off
– To switch on the vacuum cleaner, press the on/off
button (2).
– To switch off the vacuum cleaner, press the on/off
button (2) again.
Maintenance and Service
Maintenance and Cleaning
To ensure safe and efficient operation, always keep
u
the dust extractor and the ventilation slots clean.
– Clean the housing of the vacuum cleaner occasionally
with a damp cloth.
– Clean dirty charging pins using a dry cloth.
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
Cleaning the dust container (see figures C1–C2)
Clean the dust container (6) after each use in order to en-
sure that the vacuum cleaner continues to perform optim-
ally.
– Hold the vacuum cleaner down slightly so that dust can-
not fall out of the dust container when the vacuum cleaner
is opened.
– Press the release button (1) and remove the dust
container (6) from the motor housing (5).
– Shake out the dust container (6) over a suitable waste
bin.
– Clean the filters if required.
– Then fit the dust container into the bottom of the motor
housing and apply light pressure to the dust container un-
til you hear it click into place.
Cleaning the filter (see figures D1 – D4)
The filter (16) must not be wet cleaned.
Bosch Power Tools
– Hold the vacuum cleaner down slightly so that dust can-
not fall out of the dust container when the vacuum cleaner
is opened.
– Press the release button (1) and remove the dust
container (6) from the motor housing (5).
– Remove the coarse dirt filter (15) from the filter (16).
– Reach into the recess (17) on the motor housing (5) and
pull the filter unit (16) off the motor housing by the filter
seal (18).
– Tap the filter (16) carefully over a suitable waste bin.
Brush the flaps of the filter with a soft brush.
To assemble, perform the same steps in reverse order.
Storage
– Insert the vacuum cleaner accessories into the holder (8)
provided on the vacuum cleaner.
– Optionally, use the wall bracket (19) for space-saving
storage of the vacuum cleaner and its accessories
(see figure E).
Faults
If the suction power is insufficient, check:
– Is the dust container (6) full?
▷ (see "Cleaning the dust container (see figures C1–
C2)", page 13)
– Are the filters (15)/(16) clogged with dust?
▷ (see "Cleaning the filter (see figures D1 – D4)",
page 13)
– Is the battery's state of charge (4) too low?
▷ (see "Battery Charging", page 12)
Regularly emptying the dust container and cleaning the fil-
ters will ensure optimum suction power.
If suction power is still not sufficient, take the vacuum
cleaner to the after-sales service.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
English | 13
1 609 92A 7UP | (30.05.2022)