Start Up; Packaging; First Starting Up; Connexion Of Power Supply - Secomam UviLine Connect Série Manuel Utilisateur

UviLine Connect Series

8 START UP

8.1

PACKAGING

Packing: This photometer is sent out in a protective transport packing. We recommend: Keep the packing material.
The original packing protects the photometer against damage if it has to be transported.
8.2

FIRST STARTING UP

Perform the following activities:

Connect the power supply (see section 7.2.1)

Switch on the photometer (see section 7.2.1)

Install USB Instrument driver on your computer (see section 7.2.2)

Install application software on your computer (see section 7.2.3)
Warning : Do not plug any USB connection before having done USB Driver installation on remote computer.
8.2.1

CONNEXION OF POWER SUPPLY

The power is supplied via the enclosed plug-in power pack. The power pack supplies the photometer with low
voltage (12 VDC).
Warning
The line voltage of the usage location must fulfil the specifications stated on the power pack. Always use
the supplied 12 V original power pack only.
1
1) Connect the miniplug of the power pack to the socket (1) of the spectrophotometer.
2) Connect the power pack to an easily accessible power socket.
3) Switch ON instrument power with ON/OFF button (2).
The instrument power LED (white color) is lighting showing instrument is powered.
.
Fig. 14 Connection of power supply
- 63 -
2