Cleaning; Cleaning Your Spectrophotometer; Cleaning The Lenses - Secomam UviLine Connect Série Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9.2

CLEANING

WARNING
The housing components are made out of synthetic materials (ABS, PMMA and PC). Thus, avoid contact
with acetone, ethyl alcohol and similar detergents that contain solvents. Any splashes must be wiped off
immediately.
9.2.1

CLEANING YOUR SPECTROPHOTOMETER

Clean your photometer as follows:
If the housing surface is dirty, wipe it with a soft cloth and mild soapy water.
Remove any chemicals splashes as soon as possible.
For disinfection, you can use isopropanol for cleaning for a short time.
9.2.2

CLEANING THE LENSES

SECOMAM advises to regularly check that the 2 lenses inside the cell holder are clean. In order to access the
lenses, use the Quick –Lock system to take out the accessory inserted in the cell holder (see picture below). If
necessary, then proceed to the cautious cleaning of the 2 lenses using a cotton bud lightly soaked with isopropanol.
Check there are no deposit/traces before use.
Quick Lock
UviLine Connect Series
- 66 -
Lenses

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour Secomam UviLine Connect Série

Table des Matières