EIBENSTOCK ETR 400.2 P Notice Originale page 27

Noise Emission / Vibration
The indication of noise emission is measured according to EN 60745-2-3. The
level of acoustic pressure on the work place could exceed 85 dB (A); in this
case protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60745-2-3.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total
working period.Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Warranty
According to our general terms of delivery for business dealings, suppliers have
to provide to companies a warranty period of 12 months for redhibitory defects
(to be documented by invoice or delivery note).
Damages due to natural wear, overstressing or improper handling are excluded
from this warranty.
Damages due to material defects or production faults shall be eliminated free of
charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
EU - Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with the following standards or standardization
documents:
EN 60745-1:2006
EN 60745-2-22:2013-12
EN 55014-1:2017/A11:2020
EN 55014-2:2021-04-01
EN 61000-3-2+A1:2019-03-05
EN 61000-3-3:2020-07
EN IEC 63000:2019-05
according to the provisions of the directives 2011/65/EU, 2014/30/EG,
2006/42/EG
27