EIBENSTOCK ETR 400.2 P Notice Originale page 18

Specifications
Cutting system ETR 400.2 P
Rated voltage:
Power input:
Order Number:
Frequency:
Load speed:
Max. disc diameter:
Max. cutting depth:
Spindle connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accesories:
Diamond cutting disc Premium Ø400mm
Content of Delivery
ETR 400.2 P with diamond cutting disc, tool kit and operating instructions in a
carton.
Application for Indented Purpose
The ETR 400.2 P cutting systems is intended for professional use.
With the correct diamond cutting wheel, it is designed for cutting concrete, stone
and masonry in wet cutting.
Only in conjunction with the diamond cutting disc developed especially
for the cutting system (refer to Accessories) can an optimal work
progress be guaranteed.
Use only diamond cutting discs recommended by the manufacturer.
The diamond cutting disc must be cooled with water from the available water
supply.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly. Additionally, the general
safety instructions of the leaflet supplied with the tool
must be observed. Prior to the first use, the user should
absolve a practical training. Save all warnings and
instructions for future reference.
50 / 60 Hz
1950 min
-1
400 mm
152 mm
Ø 25,4 mm
II
IP 20
ca. 11,4 kg
EN 55014 and EN 61000
18
230 V ~
2850 W
0682E000
Ordernumber:
3744T000