Publicité
Les langues disponibles
Les langues disponibles
Display and Control Panel
1
Using the Control Panel
1. Freezer temperature set button
2. Super freeze symbol (Super freeze LED)
3. Alarm symbol (Alarm LED)
4. Freezer adjusted temperature indicator
Operating your Freezer
High temperature alarm
The alarm activates when you plug the appliance for the first time.
The alarm activates when the temperature in the appliance is too high.
During the alarm:
• the alarm indicator flashes,
• the temperature indicator -24 flashes,
• the acoustic alarm beeps.
Turning off the alarm
• Press a key on the control panel to turn off the alarm. The alarm indicator is on until the
temperature is restored.
• Alarm beeping turns off automatically after 1 hour. Alarm indicator flashes and
temperature indicator -24 flashes.
• If the appliance is back to the set temperature, the alarm beeping and alarm indicator
turn off. Check if the food inside is not spoiled or thawed. If yes, refer to the "Thawing"
section.
Refer to the "Temperature regulation" section to set the appliance temperature.
Lighting (If available)
When the product is plugged in for the first time, the interior lights may turn on 1 minute
late due to opening tests.
Alarm light
In case of a problem within the freezer, the alarm led will release red light.
Freezer Temperature Set Button
This button allows setting temperature of the freezer. In order to set values for freezer
partition, press this button. Use this button also to activate super freeze mode.
2
3
EN - 14 -
4
Publicité
