Publicité
Les langues disponibles
Les langues disponibles
4
INSTALL GRID DRAIN (SKU 7075006)
• Apply a bead of PUTTY around underside of DRAIN
FLANGE (1) flange. Insert DRAIN PLUG (2) into SINK
drain hole.
• Hold DRAIN PLUG (2) to prevent turning and assemble
GASKET (3), WASHER (4), and LOCKNUT (5) from
underneath sink.
• Apply sealant to threaded end of TAILPIECE and
thread into lower end of DRAIN PLUG. Connect
other end to trap.
5
MAKE WATER SUPPLY AND WASTE CONNECTIONS
• Connect FLEXIBLE SUPPLIES (1, 2) directly to
wall supplies. Connection on fitting supplies are
3/8" compression. Connect left SUPPLY (1) to
Hot (Marked with a Red Band) and right supply
to COLD (2) wall supply.
• Faucet supplies are 20" long from faucet base.
Note: If additional supply length is
required, installer must purchase
additional parts separately.
Important: If SUPPLY HOSES (1, 2) are to
long, loop as illustrated to avoid kinking.
• Connect 1-1/4" O.D. tailpiece on POP-UP
DRAIN towaste outlet.
PUTTY
APPROX. 20"
1
RED
BAND
HOT
1
SINK
2
3
4
5
SEALANT
6
2
BLUE
BAND
3/8" COMPRESSION
COLD
Publicité
