Qlima D 810 Manuel D'utilisation page 41

MANUAL PROCESS
1. Remove the tank, see pic 1.5., from the appliance.
2. Grab on firmly to the tank and prevent any water dropping from the tank.
3. Empty the tank carefully in a sink or other location specified for drainage water.
4. Clean the tank if necessary with a dry cloth.
5. Place the tank in the appliance.
DRAIN HOSE
Always make sure the tank is empty before connecting the drain hose
1. Use the pre-packed hose
2. Remove the drain stop.
3. Thread the drain hose onto the nozzle and always make sure it is locked securely.
4. Make sure the hose goes through the drain hole and is places downward.
5. Connect the hose to a drain, preventing it from being bent or obstructed.
Don't remove the water tank while the hose is connected.
When the drain hose is eventually removed, prepare for water leaking out of the hose or the
drain nozzle.
WIRELESS OPERATION (ONLY AVAILABLE ON SMART MODELS)
BASIC RF FEATURES
Parameter
Working frequency
Conducted power
Wireless standard
Data transmission rate
Antenna type
WIFI-SETUP
1. Make sure the appliance is plugged into a power outlet and placed near a Wi-
Fi router
2. It is important that the Wi-Fi network and the appliance will be connected to a
2.4 GHZ network.
3. Enable bluetooth and WiFi on your phone or tablet. Use your phone to scan
the QR code below or search "Smart life" in Google play or App store to download and
install the app.
4. It is important to follow the steps in the app that indicate how the appliance gets connected.
5. Turn on the appliance using the ON/OFF button
6. Press and then hold down the "TIMER" button for at least 3 seconds. At that time, the
"WATER TANK FULL" LED will start flashing at a fast rate with a red colour.
7. If all goes well, the appliance now becomes visible in the app for pairing. This can be done
with the model number (this starts with YL-XXXX, or with the PVG model name D812).
8. Click on the appliance in the app to connect. The app and appliance will now go through the
verification process. This may take several minutes.
Description
2.400 to 2.4835 GHz
13 dBm to 23 dBm
IEEE 802.11b/g/n (channels 1 to 14)
11b: 1, 2, 5.5, 11 (Mbps)
11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbps)
11n: HT20 MC S 0 to 7
PCB antenna with a peak gain of 2.54 dBi
4
41