Qlima D 810 Manuel D'utilisation page 40

TIMER INDICATOR 2H
4H 6H
CONT INDICATOR
40% 50% 60%
HUMIDITY INDICATOR
OPERATING CONTROL FUNCTIONS:
When user plugs the appliance into power socket. The appliance is in standby.
ON/OFF
HUMIDITY
TIMER
WATER FULL
AUTOMATIC
DEFROSTING
COMPRESSOR
PROTECTION
MEMORIZE
AUTOMATIC
RESTART AFTER
POWER FAILURE
EMPTY THE WATER TANK
There are two ways of emptying the water tank. The first is doing it manually, the second is by
using a drain hose.
Only remove the tank when the appliance is not in operation and unplugged.
4
40
Touch [TIMER] button to set time , the timer indicator lights on.
It shows 2h~4h~6h.
When the appliance is running in CO mode, The CONT indicator
lights up.
When selecting the humidity setting, the green indicator will
light on and the appliance will start dehumidifying according to
the set humidity.
On: Turn "ON/OFF". The appliance will start to work.
Off: Press the "ON/OFF" again to turn off the appliance.
The appliance could set the humidity: CONT~40%~50%~60%~CONT.
The digital tube will show CONT~40%~50%~60%~CONT... in circula-
tion.
When appliance is powered on, press Timer (2h-4h-6h) for the
reservation of operating, The timer indicator lights on. It shows
2h~4h~6h.
When the water tank is full, the appliance will alarm, The power light
and the water full indicator light up .The appliance will automatically
stop operating. Empty the water and then refit the water tank. The
appliance will automatically operates in last setting. Compressor will
starts operating after 5 minutes.
When using the appliance in low temperature environments, frost
may build up inside the appliance. The appliance has an automatic
defrosting function and will automatically activate defrost mode. The
Power light and Deforst indicator will illuminate.
This appliance is equipped with compressor protection function that is,
compressor has five minutes period between starts operation and shut
down.
The appliance will memorize previous setting when power plug is con-
nected.(Child lock and Timer will not be memorized). Appliance will
operate in default setting when power plug is disconnected.
The appliance will automatically turn on and operates in last setting
after power returns. (Timer will not be memorized).