Publicité
Les langues disponibles
Les langues disponibles
EN
1
10.9
REMOVE THE HARNESS
1.
Open the quick-release fasteners on the chest
strap.
2.
Loosen the harness straps by lifting the sliding
adjusters and then take off the machine.
In the event of imminent danger, quickly remove the
machine. Release the chest strap before you put the
machine on the ground.
11
OPERATION
Make sure the blower tube is in position before
operation.
11.1
START THE MACHINE
1.
Pull the trigger (3) to start the machine.
2.
Pull the trigger fully to increase the speed.
3.
Release the trigger to decrease the speed.
2
11.2
STOP THE MACHINE
1.
Release the trigger to stop the machine.
2
1
3
WARNING
WARNING
1
3
English
Wait until the motor stops after you stop the
machine.
11.3
CRUISE CONTROL LEVER
1.
Pull the cruise control lever (2) clockwise to
increase the speed. This will lock the speed at
the desired setting.
2.
Push the cruise control lever counter clockwise to
decrease the speed.
2
3
If you decrease the speed all the way, the unit will
stop and it is necessary to start the machine again.
11.4
TURBO BUTTON
1.
Push the turbo button (1), the machine is at the
highest speed.
2.
Release the turbo button, the machine is at the
normal speed.
Using the turbo button drains the battery the fastest.
Only use the turbo button when needed.
11.5
OPERATION TIPS
• Blow around the outer edge of the unwanted
materials to prevent the unwanted materials from
scattering.
• Use rakes and brooms to clear the unwanted
material before you blow.
• Make the surfaces wet before you clear the
unwanted material in dusty conditions.
• Look out for children, pets, open windows, and
cleaned cars during operation.
• Clean the machine.
• Discard the unwanted material when you complete
work.
12
NOTE
1
NOTE
NOTE
Publicité
