Publicité
Les langues disponibles
Les langues disponibles
EN
10.3
INSTALL THE CONNECTING TUBE
12
1.
Align the rib (12) on the connecting tube with the
slot (13) in the flexible tube.
2.
Put the end of the connecting tube (6) into the
flexible tube.
3.
Push the connecting tube into the flexible tube.
4.
Put the hose clamp (14) around the flexible tube.
5.
Install and tighten the available screw into the
hose clamp (14).
10.4
INSTALL THE REAR BLOWER TUBE
5
1.
Align the grooves on the rear blower tube (5) with
the tabs on the connecting tube (6).
English
13
14
6
2.
Turn the rear blower tube in the direction of the
slot until the tabs lock into position.
Put the cord in the cord retainer.
10.5
INSTALL THE FRONT BLOWER TUBE
4
1.
Align the grooves on the front blower tube (4) with
the tabs on the rear blower tube (5).
2.
Install the front blower tube onto the rear blower
tube until the tabs engage the grooves.
3.
Turn the front blower tube in the direction of the
slot until the tabs lock into position.
The front tube has two fixed positions. You can
adjust the length of the tube according to different
needs.
10.6
INSTALL THE BATTERY PACK
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1.
Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
10
WARNING
5
NOTE
WARNING
Publicité
