Product Description And Specifications - Bosch Universal Brush Notice Originale

water, and moisture. There is a risk of explosion.
Do not use chemicals, undiluted acids, bleaches,
u
cleaning agents containing chlorine etc. when clean-
ing. This could damage the surfaces being cleaned. First,
test for tolerance on an inconspicuous area.
Read all instructions on cleaning agents before using
u
them on hot surfaces. Contact with hot surfaces can
cause cleaning agents to ignite or produce harmful va-
pours.
Product Description and
Specifications
Intended Use
The power tool is intended for the wet brushing of surfaces
in indoor and outdoor areas. It is particularly suited for
cleaning joints and tiles in the bathroom.
The power tool is intended only for household and domestic
use.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Holder for cleaning pads
a)
(3) Brush
a)
(4) Detailed brush
(5) Pad holder with climbing hook
(6) Blue microfibre non-scratch pad
a)
(7) Green kitchen pad
(8) Brown, abrasive heavy-duty pad
(9) White eraser melamin pad
(10) Battery charge indicator
(11) Micro USB port
(12) Micro USB cable
b)
(13) Power supply (country-specific)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Commercially available (not included in the scope of deliv-
ery)
Technical Data
Cordless brush
Article number
Rated voltage
No-load speed n
0
Weight according to
EPTA-Procedure 01:2014
Protection rating
Bosch Power Tools
Cordless brush
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended power supply
Rechargeable battery
Max. capacity
Energy
Number of battery cells
A) including USB port
B) Limited performance at temperatures < 0 °C
Additional technical data can be found at:
http://www.bosch-do-it.com/ecodesign
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). Uncertainty K = 3 dB. The noise
level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-4:
a) a
h
The vibration level and noise emission value given in these
a)
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
a)
pare power tools. They may also be used for a preliminary
a)
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
UniversalBrush
ator from the effects of vibration, such as servicing the
3 603 CE0 0..
power tool and application tools, keeping their hands warm,
V 3.6
and organising workflows correctly.
-1
min 215
kg 0.33
A)
IP X5
Protection against
B)
and
(triax vector sum) and uncertainty K
h
2 2
< 2.5 m/s , K = 1.5 m/s
1 609 92A 6M1 | (30.08.2021)
English | 11
UniversalBrush
water jets from all
directions
°C 0 to +45
°C –5 to +50
2 609 120 7, etc.
Li-ion
Ah 1.5
Wh 5.4
1