Maintenance And Service - Bosch Universal Brush Notice Originale

Changing the cleaning adapter
– Pull the fitted cleaning adapter (brush (3), detailed
brush (4) or pad holder (5) with a suitable pad) firmly
from the holder (2).
– Insert the required cleaning adapter into the holder (2),
until it audibly clicks into place.
Changing the pad
The pad holder (5) is fitted with climbing hooks, allowing in-
dividual pads ((6), (7), (8) or (9)) to be fastened quickly
and simply.
– To remove a pad, lift it from the side and pull it off the pad
holder (5).
– Remove dirt and dust from the pad holder (5), e.g. with a
paintbrush, before attaching a new pad.
– Press the pad firmly against the bottom side of the pad
holder (5).
Operation
Starting Operation
Switching On/Off
– To switch on the power tool, press the on/off switch (1).
– To switch off the power tool, press the on/off switch (1)
again.
Working Advice
The cleaning performance is primarily determined by the
choice of cleaning adapter and the contact pressure.
Only cleaning adapters in perfect condition will deliver good
cleaning performance and protect the power tool.
Be sure to apply consistent contact pressure in order to in-
crease the service life of the cleaning adapters.
Excessively increasing the contact pressure will not lead to
increased cleaning performance, but to more severe wear of
the power tool and of the cleaning adapter.
Use only original Bosch accessories.
u
Cleaning surfaces
– Protect the surroundings of the area to be cleaned from
spray using suitable covers.
– Moisten the bristles or the pad with a suitable liquid, gel-
like or powdery cleaning agent.
or
Spray the surface to be cleaned directly with a spray
cleaner.
– First position the power tool on the surface to be cleaned
and then switch on the power tool.
This prevents spray.
– Move the power tool slowly, in a circular motion and
without exerting pressure on the surface to be cleaned.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be over-
loaded. If the power tool is overloaded or the permitted bat-
tery temperature is exceeded, the electronics of the power
Bosch Power Tools
tool will switch off until the temperature returns to within the
optimum operating temperature range.

Maintenance and Service

Maintenance and Cleaning
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
If the battery is no longer working, please contact an author-
ised after-sales service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
– Do not immerse the power tool in water or other liquids.
Cleaning Adapters and Pads
– You can clean the cleaning adapters and their pads in the
dishwasher at a temperature of up to 50 °C.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
strictions.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
English | 13
1 609 92A 6M1 | (30.08.2021)