1290P
aDjUSTing THe FUncTionS
WinDing tHe movement
Self-winding watche sare wound by the movement of the wrist when the watch is worn. if the
watch has not been worn for around 40 hours, wind it by hand with the crown in position 0,
that is, turn the crown in the forward direction (around10 turns of the crown are sufficient
to restart the mechanism).
Setting tHe time
Pull the crown out to position 1, then turn it forward to position the hands.
Push the crown back to position 0 after the adjustment.
Do not adjust the time when the minute repeater mechanism is engaged.
Do not activate the slide at the same time you are setting up the time.
1 2