Cleaning the Full Bin Sensors
1
Remove and empty the bin.
EN
2
Wipe the inner sensors with a
clean, dry cloth
Washing the Bin
Important:
Do not wash the filter.
Remove the filter before washing the bin.
1
Release the bin, remove the filter,
and open the bin door.
5
For more information, visit global.irobot.com
2
Rinse the bin using
warm water.
Note:
Bin is not
dishwasher
safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver
to remove the screw holding the
Edge-Sweeping Brush in place.
2
Remove the Edge-Sweeping Brush,
clean the brush and the brush post,
and then reinstall the brush.
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel to remove it.
2
Remove any debris from inside the
wheel cavity.
3
Reinstall all parts when finished. Make
sure the wheel clicks back into place.
Axle
Housing
Important:
A front wheel clogged with hair
and debris could result in damage to your
floor. If the wheel is not spinning freely after
you have cleaned it, please contact
Customer Care.
Wheel