Télécharger Imprimer la page

iRobot Roomba Serie Guide Du Propriétaire page 7

Masquer les pouces Voir aussi pour Roomba Serie:

Publicité

Les langues disponibles

Les langues disponibles

• You can use the Spot Clean feature to have the robot go after
specific spills. Just place the robot in the center of the debris and
EN
press
(Spot Clean). The robot will clean the area by spiraling
outward about 3 feet (1 meter) and then spiral inward to end
where it started.
• Keep the robot on the Home Base
ready to clean when you need it. If you need to store the robot off
of the charging station, turn off the battery by removing the robot
from the Home Base charging station and holding down the
(Home) button for 9 seconds, all indicators will turn off and you
will hear an audible tone, then store the robot in a cool, dry place.
To wake the robot up and turn on the battery, plug in the Home
Base charging station and place the robot on the
charging station.
• When the robot is charging, it will turn off the indicator lights
to save energy. You can check the status by pressing the CLEAN
button. The Battery Indicator icon will illuminate amber when
the battery is charging, and green when the battery is fully
charged.Battery charge status can also be viewed in the
iRobot HOME App.
Note:
After each use, empty the bin and clean the filter.
3
For more information, visit global.irobot.com
charging station so it's always
®
Accessories
Dual Mode Virtual Wall
Barrier
®
(compatible with all models)
Use the Dual Mode Virtual Wall
barrier to
®
keep the robot in the places you want
cleaned — and out of the ones you don't.
It creates an invisible barrier that only the
robot can see. You can leave the device in
position between cleanings.
Choose the mode to meet your needs:
Virtual Wall Mode:
When the switch is in
the Virtual Wall position (
), the device
will create a linear barrier to block
openings up to 10 feet (3 meters).
Note:
This barrier gets wider as it gets
further from the device (refer to illustration).
Halo Mode:
Toggle the switch to the
Halo position (
), to create a circular
barrier. This will prevent the robot from
approaching zones you want to protect
such as a pet bowl, vase, or under a desk.
The Halo barrier extends approximately
24 inches (60 centimeters) from the
center of the device.
Note:
The batteries will last about 8-10 months under normal use. If you are not
planning to use your Virtual Wall barrier for an extended period of time, be sure
to turn the switch to the Off, or middle position.

Publicité

loading

Ce manuel est également adapté pour:

Roomba e6