Denver E-MTB 200 Manuel De L'utilisateur page 37

Adjusting the seat and the handlebars
It is important to adjust your bicycle according to your morphology.
Seat
Open the quick-lock system
When positioning the seat in its lowest position, make sure that it does not touch any components of
the bicycle such as the frame. Likewise, make sure you do not exceed the minimum insertion mark of
the seat tube. This insertion mark should never be visible when using the bicycle.
To check the seat's correct height, you should be sitting with straight legs and your heel on the pedal
(illustration B). When pedalling, the knee should be lightly bent with the foot pointing down
(illustration A).
Handlebars
Your bicycle's handlebars can be adjusted up and down.
Your bike is equipped with a stem called '' Aheadset '', you can adjust the handlebars by changing the
position of the adjusting rings between the stem and the upper steering bearing. It is advisable to have
this operation carried out by a qualified technician.
Make sure the handlebars are perpendicular to the front wheel axle.
37