Publicité
Les langues disponibles
Les langues disponibles
mechanism even if the motor does not run by the cover
interlocking.
Be sure to have removed any tools from the machine after
completion of service work.
Generally garden shredders require little maintenance.
To maintain their efficiency and a long life, observe the
following:
Keep vent slits clean and free from obstructions.
Check the locking screws (tighten where necessary).
Clean the device after shredding.
To clean your product only use a warm moist cloth and a
soft brush.
Never use cleaning agents or solvents. Otherwise the
device may be damaged irreversibly. Plastic parts may
be corroded by chemicals.
Do not clean the machine with running water or high-
pressure cleaners.
After each operation treat bare metal parts with an
environment-compatible biodegradable spray oil to
protect them against corrosion.
Typ / Model
Year of construction
Motor
Motorrating P
(P40)
1
Motorrating P
(S1)
1
Rotational speed cutting roller
On/off switch with
Weight
Ecoustic pressure level at work L
(mesured to 2000/14/EC)
Measured level of the acoustic output L
(mesured to 2000/14/EC)
Guaranteed level of the acoustic output L
(mesured to 2000/14/EC)
max. branch diameter
(only for freshly cut wood)
Safety class
Protection class
Mains fuse
UK
Operating mode:
(S1)
Continuous operation
Technical data
ALA 2500-2
see last page
AC-Motor 230-240 V~, 50 Hz, 2500 min
2500 W
2000 W
40 min
-1
overload protection; cutting and reverse function, zero-voltage initiator
25.4 kg
PA
83.7 dB (A) K = 1:5 dB (A)
WA
90.4 dB (A)
WA
92 dB (A)
max. 40 mm
IP X4
16 A time-lag
13 A time-lag
(P40)
Continuous intermittent operation
for 10 min.:
4 min. continuous operation
6 min. operation at no or low load
the cutting roller and shaving plate are expendable parts,
though with normal use and correct adjustment they
have a service life of many years.
Replace worn and damaged single parts as a whole
set to prevent any unbalance.
Dislocation / Transport
Before each dislocation / transport
Dislocation:
Only move the machine at walking speed, never run with it
(changing locations).
Transport:
When transporting the product within a car put it in the boot or
on a separate loading area.
Do not throw the device when loading it. Secure the device
against tipping over or damages.
-1
Switch off device.
Wait for standstill of the device.
Pull out mains plug.
Technical modifications reserved!
19
Publicité
