Publicité
Les langues disponibles
Les langues disponibles
Remove all parts from the
packaging.
Mount each of the two
A.
supporting legs (1/2) with
washers (4) and self-
locking nuts (5) using the
nut wrench supplied on the
housing.
Mount the wheel axle (3)
B.
with the 2 screws M6 x 50
(6), washers (4) and nuts
(5)
using
the
socket
wrench and nut wrench
supplied on the carriage.
Push the wheels (7) onto
C.
the axle. Fasten the wheel
cover (8) in the wheel axle
using a hammer. Sch
Description
1. Hopper opening for material to be shredded
2. On / Off switch
3. Direction of rotation selector switch
4. Reset button / motor protection
5. Adjusting knob for cutting roller
6. Ejection slot
7. Carriage
8. Ventilation slots
9. Power supply plug
12
Assembly
Publicité
