Publicité
Les langues disponibles
Les langues disponibles
2.0 General
2.1 All rights reserved
The manufacturer has a policy of continuous product improvement and reserves the right to make
changes to the specifications without prior notice. The technical details are considered correct but do
not form the basis for a contract or warranty. All orders are accepted subject to the standard terms and
conditions of sale and delivery (which will be sent to you at your request).
The information in this document is subject to change without notice. The most recent version of this
manual is always available at www.markclimate.com/downloads.
2.2 General warnings
Installation must comply with the relevant local and/or national regulations. You must therefore have the
PinTherm Mistral installed by a professionally qualified installer in accordance with all applicable national
and international regulations. Faulty installation, adjustment, alteration, maintenance activity or repair
shall render the warranty void.
Always switch off the 230V power supply before connecting the terminals. The mains voltage on the
PinTherm Mistral must be able to be switched off in a double-pole manner by means of a permanent
switch that is suitable for 250VAC / 10A and complies with the applicable safety regulations.
Only devices that comply with EN-IEC 61010-1 may be operated with the PinTherm Mistral.
Clean the housing of the PinTherm Mistral with a damp cloth. Do not apply solvents.
There are no requirements regarding ventilation in the immediate vicinity of the controller.
Warning - risk of electric shock.
Warning - general warning, risk of danger.
!
There can be voltage on the connection terminals where a
3.0 Technical specifications
3.1 Technical specifications PinTherm Mistral
• Type designation
• Item number
• Power supply PinTherm Mistral : 90 – 240 VAC / 47-63Hz
• Own consumption
• Clock
• Switching programs
• Switching differential
• Dimensions
• Weight
• Protection class
• Installation environment
• Over voltage category
• Pollution level
• Switch contact(s)*
• Temperature setting
• Overtime timer
4
: PinTherm Mistral
: 06 29 110
: < 9W
: 24 hour clock with automatic summer/winter time switching
: 3 switching programs a day
: 0,1 - 3K
: 166 x 160 x 106mm (bxwxh)
: 880 grammes
: IP-54
: Transport/storage: -20°C until +70°C.
Operational: -10°C until +60°C
Relative air humidity: 0-90% not condensating
Installation maximal 2000 meter above sea level.
: 11
: 2
: 230Vac/10A (2,5A)
: 0 until 39°C per 1°C adjustable
: adjustable 1, 2 or 3 hours (060, 120, 180)
is placed.
!
Publicité
