Parkside PKI 2.8 B2 Mode D'emploi Et Consignes De Sécurité page 40

PARKSIDE PKI 2.8 B2
6.5.9 Installing the tools
The following tools/holders are supplied with the device:
Magnet [C]
Double hook [E]
Tool holder [I]
Note: For the magnet [C], the tool holder must be pushed onto the attachment
beforehand because of its size.
38 - English
Place the small barbed hook of the tools in
the opening at the end of the goose neck,
just below the camera head [1].
Carefully slide the tool holder
completely over the camera head [1].
Make sure that the attachment is in the
insertion recess of the tool holder.
Hook [D]
Mirror [F]
[I]