Publicité
Les langues disponibles
Les langues disponibles
en Service programmes
Cleaning
Duration: approx. 6 minutes
1.
Press the $/± button to open the
menu.
Use the rotary selector to select
2.
"Clean".
Press the rotary selector to start the
3.
programme.
The instructions in the display guide you
through the programme.
4.
Empty the drip tray and re-insert.
Open the grounds compartment,
5.
add a cleaning tablet, close the
grounds compartment and confirm.
Place a container with a capacity of
6.
at least 1.0 l under the outlet system
and confirm.
The programme runs.
Duration: approx. 5 minutes
Empty the container and confirm.
7.
The programme has finished. The
appliance is ready for use again.
Press the $/± button to exit the
8.
programme.
calc'nClean
Duration: approx. 26 minutes
calc'nClean combines the functions
"Descale" and "Clean". If the two
programmes are due close together,
the appliance suggests this service
programme automatically.
The line at the bottom of the display
indicates in how many minutes the
water tank will need to be rinsed and
refilled with water, for example.
Press the $/± button to open the
1.
menu.
Use the rotary selector to select
2.
"calc'nClean".
Press the rotary selector to start the
3.
programme.
The instructions in the display guide you
through the programme.
Empty the drip tray and re-insert.
4.
76
5.
Empty, clean and re-connect the milk
container.
Open the grounds compartment,
6.
add a cleaning tablet, close the
grounds compartment and confirm.
7.
Remove the water filter (if present)
and confirm.
Fill the empty water tank with
8.
lukewarm water up to the marking
"0.5 l". Dissolve 1 descaling tablet
in the water.
Place a container with a capacity of
9.
at least 1.0 l under the outlet system
and confirm.
The programme runs.
Duration: approx. 19 minutes
Info: If there is not enough descaling
solution in the water tank, you will be
asked to: Refill with still water and
confirm.
Rinse out the water tank and (if
10.
removed) re-insert the water filter.
Pour in fresh still water up to the
11.
"max" marking and re-insert the
water tank.
The programme runs.
Duration: approx. 7 minutes
Empty the container and confirm.
12.
13.
Empty the drip tray and re-insert.
Empty, clean and re-connect the milk
14.
container.
The programme has finished. The
appliance is ready for use again.
Press the $/± button to exit the
15.
programme.
Publicité
