De Dietrich UMS20 + MOSE20 Notice D'installation Et D'entretien page 107

1.8 Liabilities
Manufacturer's liability
Installer's liability
2 Symbols used
2.1 Symbols used in the manual
7797831 - v04 - 07122022
Our products are manufactured in compliance with the requirements of the various Directives appli­
cable. They are therefore delivered with the
ests of the quality of our products, we strive constantly to improve them. We therefore reserve the
right to modify the specifications given in this document.
Our liability as manufacturer may not be invoked in the following cases:
Failure to abide by the instructions on installing the appliance.
Failure to abide by the instructions on using the appliance.
Faulty or insufficient maintenance of the appliance.
The installer is responsible for the installation and initial commissioning of the appliance. The instal­
ler must observe the following instructions:
Read and follow the instructions given in the manuals provided with the appliance.
Install the appliance in compliance with prevailing legislation and standards.
Carry out initial commissioning and any checks necessary.
Explain the installation to the user.
If maintenance is necessary, warn the user of the obligation to check the appliance and keep it in
good working order.
Give all the instruction manuals to the user.
marking and any documents necessary. In the inter­
This manual uses various danger levels to draw attention to special
instructions. We do this to improve user safety, to prevent problems and to
guarantee correct operation of the appliance.
Danger
Risk of dangerous situations that may result in serious personal
injury.
Danger of electric shock
Risk of electric shock.
Warning
Risk of dangerous situations that may result in minor personal
injury.
Caution
Risk of material damage.
Important
Please note: important information.
See
Reference to other manuals or pages in this manual.
en
2 Symbols used
107