Télécharger Imprimer la page

ETNA OM916MZ/E04 Manuel D'utilisation page 146

Publicité

Les langues disponibles

Les langues disponibles

INFORMATION!
The select timer function can be reset to 00:00 by long-pressing the KNOB.
INFORMATION!
The most recently used timer function values can be stored and offered as preset values the
next time you use the timer. As a factory setting, this function is off, but it can be activated (see
chapter Selecting extra functions, Adaptive function).
The cooking duration symbol
the setting and confirm it by pressing the KNOB (in our case, 2:00). Press
the KNOB again and rotate it to select the symbol
the time when you wish your food to be done (in our case, this is 18:00,
or 6 p.m.). Desired cooking end time will appear on the display unit
(18:00). Confirm the setting by pressing on the KNOB.
Touch the
key to start baking.
While waiting to be activated, the oven switches to a partial stand-by
(the display unit goes dark). The oven will switch on with the selected
settings automatically (in our case at 16:00, or 4 p.m.). The oven will
switch off at the set time (in our case, this is 18:00, or 6 p.m.).
INFORMATION!
Cooking end time and the clock will alternate on the display unit.
After the set time expires, the oven will automatically stop operating.
Sign End and 00.00 will alternate on the display unit. An acoustic signal
will be emitted, which can be turned off by touching any key. After one
minute, the acoustic signal will be switched off automatically.
WARNING!
This function is not suitable for food requiring fast preheating.
Perishable food should not be kept in the oven for a long time.
Before using this mode, check whether the clock on the
appliance is accurately set.
Minute minder setting
The minute minder can be used independently of oven operation. The
longest possible setting is 24 hours. During the last minute, the minute
minder is displayed in seconds.
Rotate the KNOB to select the
Rotate the KNOB and set the minute minder duration. Confirm the setting
by pressing on the KNOB.
will appear on the display unit. Choose
symbol and confirm your setting.
. Confirm and set
17

Publicité

loading

Ce manuel est également adapté pour:

Om916mz