emerio CBC-122043.1 Mode D'emploi page 11

More advanced functions: (Only by remote control.)
Weekly timer function
1. Follow below steps in the table to set the weekly timer.
Step Press button The LED display shows
1 WEEK (3 sec.)
2 SET
+ or –
3
4 OK
5 SET
+ or –
6
7 OK
8 SET
+ or –
9
10 OK
11 ED
+ or –
12
13
OK
14 TEMP
+ or –
15
16 OK
17 TIME ON
+ or –
18
19 OK
20 TIME OFF
+ or –
21
22 OK
Timer setting is finished. The current temperature will appear on the LED display after approx. 10 seconds.
If you want to set the second timer, please repeat the steps above.
UU flashes
ON or OF flashes
ON or OF flashes
UU
01 or 99 flashes
01 or 99 flashes
UU
U1 flashes
U1 to U7 flashes
The selected day
01 flashes
01 to 04 flashes
The selected number
HP
00 to 37 flashes
The selected
temperature
HE
00 to 23 flashes
The selected start time
HF
"start time +1" to 24
flashes
The selected stop time
+ = ON: Timer function will be on. (During the set times, the
heater will automatically switch on/off.)
– = OF: Timer function will be off (During the set times, the
heater will not automatically switch on/off.)
+ = 01: All timer settings will be executed only once.
– = 99: All timer settings will be executed repeatedly. [See
Select the day of the week (U1 = Monday, U2 = Tuesday, etc.)
for which you want to make a timer.
You can make totally 4 timers per day. So name the timer with
a number (01, 02, 03 or 04) to distinguish from each other.
[See Attention (2)].
Set the desired temperature (0 - 37 °C). The default setting
Set the desired start time from 00 to 23. [See Attention
Set the desired stop time from the "start time +1" to 24.
For example, if the start time is 10, the stop time can only
be set from 11 to 24. [See Attention (3)].
- 10 -
Note
Select:
Select:
Attention (1)].
is 20 °C.
(3)].