Options
Making group calls through the Voice Assistant
Making private calls through the Menu
Making private calls through the Voice Assistant
If errors arise when you initiate a call, your device shows the following indications:
●
A tone sounds.
●
The top and bottom crescent red LED blinks twice.
6.2
Receiving Calls
When you receive calls, your device shows the following indications:
For private calls:
●
The device vibrates.
●
A tone sounds.
●
The top crescent purple LED blinks twice continuously.
Actions
a. Press the Voice Assistant button.
b. After you hear a tone, speak your command
into the accessory microphone while men-
tioning the targeted talkgroup.
c. To call, press and hold the PTT button.
d. Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
The top crescent green LED illuminates dur-
ing transmission.
e. To stop transmitting, release the PTT button.
a. Press the Power button to enter Contact
List.
b. Press the Volume Up and Volume Down
buttons to navigate to the selected Contact.
c. To call, press and hold the PTT button.
d. Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
The top crescent purple LED illuminates dur-
ing transmission.
e. To stop transmitting, release the PTT button.
a. Press the Voice Assistant button.
b. After you hear a tone, speak your command
into the accessory microphone while men-
tioning the targeted talkgroup.
c. To call, press and hold the PTT button.
d. Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
The top crescent purple LED illuminates dur-
ing transmission.
e. To stop transmitting, release the PTT button.
MN010359A01-AB
Chapter 6: Type of Calls
33