Motorola Solutions WAVE PTX TLK 25 Guide De L'utilisateur page 18

MN010359A01-AB
Chapter 4: Getting Started
● For USB charging, the bottom crescent red LED blinks.
4.2
Turning the Device On or Off
Turning the Device On
Procedure:
Press and hold the Power button.
Result:
If your device turns on successfully, your device shows the following indications:
● The device vibrates.
● The two-bar LED illuminates and scrolls.
If your device fails to turn on, your device shows the following indications:
● The device vibrates.
● The top and bottom crescent red LED illuminates.
NOTE:
● You can hear the voice announcements
announcement again to know the current state by pressing the PTT button or the Emergency
button.
● Contact your dealer or administrator for more information regarding power up issue.
Turning the Device Off
Procedure:
Press and hold the Power button.
Result:
If your device turns off, your device shows the following indications:
● The device vibrates.
● The top and bottom crescent red LED illuminates.
● The LED bar turns off after countdown.
4.3
Adjusting the Volume
This settings allows you to adjust the device volume.
Procedure:
Perform one of the following actions:
● To increase the volume, press the Volume Up button.
1
Voice announcements during device power up are in English by default. For other languages, the voice
engine needs to be loaded for voice announcements to be in the language that has been set in your
device.
18
1
during the device power up. You can repeat the voice