Motorola Solutions WAVE PTX TLK 25 Guide De L'utilisateur page 29

Features
GPS
Network Connection
Help
Emergency
5.3
Locking and Unlocking PTT
The default setting for PTT Lock feature is "Unlock". When you power cycle your device, the PTT Lock
settings is set to the default setting.
A voice announcement sounds to prompt the user if the PTT is locked for a certain amount of time. This
feature is configurable through the WAVE PTX Portal.
Locking PTT
Procedure:
Perform one of the following actions:
Option
Locking PTT through the Menu
Locking PTT through the Voice Assistant
Result: If the PTT feature is locked successfully, your device shows the following indications:
● A voice announcement sounds.
● The top and bottom crescent red LED blinks twice.
NOTE: Locking the device PTT does not lock the PTT of a connected wired earpiece or Bluetooth
accessory.
Command Examples
● "Turn Off Scan"
● "Scan status"
● "Turn On GPS"
● "Turn Off GPS"
● "Is GPS On?"
● "Check GPS"
● "What's my Network Status?"
● "Check Network"
● "Help"
● "Command List"
● "Who declared Emergency?"
Actions
From the menu, select PTT Lock.
a. Press the Voice Assistant button.
b. After you hear a tone, speak your command
into the accessory microphone.
MN010359A01-AB
Chapter 5: Basic Device Operation
29