Motorola Solutions WAVE PTX TLK 25 Guide De L'utilisateur page 24

MN010359A01-AB
Chapter 4: Getting Started
4.8
Activating the Preconfigured Wi-Fi Access Point
(PWAP)
This feature provides a temporary Wi-Fi connection for the device to download the configurations from the
portal. Instead of the manual configuration through the Maintenance Mode Web Server, you can use the
preconfigured Wi-Fi access point for the initial Wi-Fi connection.
Prerequisites: Turn on your phone or router Wi-Fi hotspot and change the Wi-Fi name, password, and the
type to reflect the following configured TLK 25 Wi-Fi access point (AP):
● Wi-Fi Name/SSID: WaveRadio
● Password: RadioManagement
● Type: WPA/WPA2-Personal(PSK)
Procedure:
To connect to the PWAP, perform one of the following actions:
● If your device is in the user mode, press the Power button and Volume Up button simultaneously.
● If your device is in the off mode, press and hold the Power button and Volume Up button
simultaneously until your device vibrates and turns on.
Your device searches for the available network.
Result:
If connection to the configured Wi-Fi AP is successful, your device shows the following indications:
● The voice announcement sounds.
● The three-bar LED illuminates.
Consequently, your device starts to download the provisioned Wi-Fi setting from the portal and your device
shows the following indications:
● The voice announcement sounds.
24