KTM A59014986088FB Instructions De Montage page 39

Faults
Blink code 2
Blink code 3
Blink code 4
Blink code 5
Blink code 6
Blink code 7
Continuously lights up red
CONNECTIVITY UNIT OFFROAD TROUBLESHOOTING 7
Malfunctions are indicated by indicator lamp
Info
The individual flashes are 0.5 seconds long (0.25 seconds
on, 0.25 seconds off).
The pause until the blink code repeats is 2 seconds.
M02092-10
Possible cause
No CAN communication
WiFi connection failed
Bluetooth ® connection failed
Malfunction in the analog sen-
sor
Stored VIN differs from the
vehicle
Recording memory full
Several malfunctions are pre-
sent
1
flashing red.
Action
–
Check connections on the Connectivity
Unit Offroad.
–
Repeat connection attempt.
–
Repeat connection attempt.
–
Check connections on the Connectivity
Unit Offroad.
–
3
Press and hold button
(Figure M02091-10 p. 15)
–
Delete recordings.
–
3
Press and hold button
(Figure M02091-10 p. 15)
(6 s... 12 s).
(6 s... 12 s).
17