Close the ground coffee compart-
6.
ment.
Press
.
7.
The coffee is brewed and then dis-
a
pensed into the cup.
Tips
You can press
¡
pensing process prematurely.
If you would like another drink with
¡
ground coffee, repeat the process.
Always add the ground coffee just
¡
before making the drink.
8.5 Dispensing drinks with
milk froth
You can use your appliance to dis-
pense coffee drinks with milk froth.
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
ATTENTION!
Milk residues can dry on surfaces
and are difficult to remove.
▶
Clean the milk system after every
use.
Tips
You can also use plant-based al-
¡
ternatives to milk, e.g. soya milk.
The quality of the milk froth de-
¡
pends on the type of milk or plant-
based alternative used.
8.6 Dispensing coffee drinks
with milk froth
Requirements
The milk tube is connected.
¡
The suction pipe is connected.
¡
to stop the dis-
Insert the suction pipe in the milk.
1.
Place your pre-warmed cup under
2.
the outlet system.
Press the symbol for a coffee drink
3.
with milk.
The display will show the drink and
a
your current settings.
→ "Drink settings", Page 52
Change the settings where neces-
4.
sary:
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 53
To adjust the coffee strength,
‒
press .
→ "Adjusting the coffee
strength", Page 52
Use the ground coffee compart-
‒
ment.
→ "Dispensing a coffee drink
made from ground coffee",
Page 50
Press
and wait until the pro-
5.
cess is complete.
After preparing the drink, the milk
system will automatically clean it-
self with a short jet of steam.
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
8.7 Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
Press
several times.
▶
→ "Drinks overview", Page 45
operation en
. If you
.
51